FASTENERS

Stainless steel A4 (C5). Screws with a coated head blend into a stained or painted facade.

Facade screw, countersunk head

Price from0,130 €/pcincl. VAT 0,161 €/pc

The countersunk head with a sealing edge sinks in properly and closes the hole, keeping moisture out even before the surface is treated. Available uncoated and in four colours — the coated head is chosen to match the board. Choose the length so that the screw does not pierce the wind barrier.

Sizes and prices2

Size	In pack	Colour and price
4,4×45	250 pcs	White RAL 9010 · 53714532,41 €incl. VAT 40,19 €Light grey RAL 7039 · 53724534,80 €incl. VAT 43,15 €Black RAL 8022 · 53744534,82 €incl. VAT 43,18 €Brown RAL 8014 · 53734532,49 €incl. VAT 40,29 €
4,4×52	250 pcs	Uncoated · 53755234,96 €incl. VAT 43,35 €White RAL 9010 · 53715234,79 €incl. VAT 43,14 €Light grey RAL 7039 · 53725236,15 €incl. VAT 44,83 €Black RAL 8022 · 53745237,52 €incl. VAT 46,52 €Brown RAL 8014 · 53735235,94 €incl. VAT 44,57 €

Facade screw, cylinder head

Price from0,126 €/pcincl. VAT 0,156 €/pc

A small cylinder head with a thread beneath it sinks into the wood and leaves the fastening very discreet.

Sizes and prices3

Size	In pack	Item no.	Price
4,4×60	250 pcs	537060	33,63 € 0,135 €/pc incl. VAT 41,70 €
5,0×45	250 pcs	537045	31,40 € 0,126 €/pc incl. VAT 38,94 €
5,0×52	250 pcs	537052	33,49 € 0,134 €/pc incl. VAT 41,53 €

Bimetal facade screw with drill point

Price from0,409 €/pcincl. VAT 0,507 €/pc

Made for fixing a timber facade to a ventilated steel frame. The hardened carbon steel drill point goes through the metal on its own, while the A4 stainless steel body withstands the weather. On timber battens this screw is not needed.

Sizes and prices2

Size	In pack	Item no.	Price
4,8×35	250 pcs	10004863	102,13 € 0,409 €/pc incl. VAT 126,64 €
4,8×57	250 pcs	10004864	121,70 € 0,487 €/pc incl. VAT 150,91 €

Coil nails at 15° for a nail gun, loose nails and brad nails. Stainless steel A4.

Facade nail 15°, uncoated

Price from0,063 €/pcincl. VAT 0,078 €/pc

Plastic-collated coil nail for a nail gun, domed head, stainless A4. Meets CE requirements under EN 14592. The unlacquered head stays visible on the surface as silver grey.

Sizes and prices3

Size	In pack	Item no.	Price
2,8×48	800 pcs	779001	50,43 € 0,063 €/pc incl. VAT 62,53 €
2,8×55	800 pcs	779011	55,19 € 0,069 €/pc incl. VAT 68,44 €
2,8×57	800 pcs	779050	59,84 € 0,075 €/pc incl. VAT 74,20 €

Facade nail 15°, coated head

Price from0,132 €/pcincl. VAT 0,163 €/pc

The same nail with a lacquered head in seven RAL shades — the head is chosen to match the board. The photo shows anthracite grey; the shades differ only in the colour of the head.

Sizes and prices2

Size	In pack	Colour and price
2,5×57	800 pcs	Quartz grey RAL 7039 · 779036121,98 €incl. VAT 151,26 €Black-brown RAL 8022 · 779034121,98 €incl. VAT 151,26 €
2,8×48	800 pcs	White RAL 9010 · 779005114,80 €incl. VAT 142,35 €Quartz grey RAL 7039 · 779004114,80 €incl. VAT 142,35 €Anthracite grey RAL 7016 · 779010124,38 €incl. VAT 154,23 €Black-grey RAL 7021 · 779009105,24 €incl. VAT 130,50 €Black-brown RAL 8022 · 779002114,80 €incl. VAT 142,35 €Copper brown RAL 8004 · 779008124,38 €incl. VAT 154,23 €Red RAL 3009 · 779007114,80 €incl. VAT 142,35 €

Facade nail, loose

Price from0,064 €/pcincl. VAT 0,079 €/pc

The same facade nails loose, for hand nailing — for smaller jobs and repairs. Stainless A4, domed head, CE EN 14592.

Sizes and prices2

Size	In pack	Item no.	Price
2,8×48	250 pcs	777512	16,00 € 0,064 €/pc incl. VAT 19,84 €
2,8×55	250 pcs	777514	16,65 € 0,067 €/pc incl. VAT 20,65 €

Brad nail F16, 0°

Price from0,028 €/pcincl. VAT 0,035 €/pc

Stainless A4 acid-resistant F16 brad nail for a nail gun. The slim 1.6 mm nail is for trim details: corner mouldings, casings and reveal linings.

Sizes and prices3

Size	In pack	Item no.	Price
1,6×32	3500 pcs	774167	128,17 € 0,037 €/pc incl. VAT 158,93 €
1,6×38	3500 pcs	774168	97,85 € 0,028 €/pc incl. VAT 121,33 €
1,6×50	2500 pcs	774169	91,52 € 0,037 €/pc incl. VAT 113,48 €

For a collated screw gun — fast installation over larger areas.

Collated facade screw

Price from0,111 €/pcincl. VAT 0,137 €/pc

The same countersunk facade screw collated for a screw gun magazine — worth it when the screw count is high and installation speed matters.

Sizes and prices2

Size	In pack	Colour and price
4,4×45	1000 pcs	Uncoated · 537601110,78 €incl. VAT 137,37 €Light grey · 537609124,87 €incl. VAT 154,84 €Black · 537617120,90 €incl. VAT 149,92 €Brown · 537613120,40 €incl. VAT 149,30 €
4,4×52	1000 pcs	Uncoated · 537603129,04 €incl. VAT 160,01 €Light grey · 537611128,48 €incl. VAT 159,32 €Black · 537619137,70 €incl. VAT 170,75 €Brown · 537615130,87 €incl. VAT 162,28 €

Collated decking screw

Price from0,098 €/pcincl. VAT 0,122 €/pc

The same decking screw collated. You do not have to place each screw on the bit by hand, which speeds up work noticeably on a large deck.

Sizes and prices2

Size	In pack	Item no.	Price
4,2×42	1000 pcs	601342	98,34 € 0,098 €/pc incl. VAT 121,94 €
4,2×55	1000 pcs	601355	118,57 € 0,119 €/pc incl. VAT 147,03 €

Stainless steel A4, corrosion class C5 — suitable for thermowood, larch and pressure-treated timber.

Decking screw CLASSIC

Price from0,065 €/pcincl. VAT 0,080 €/pc

Classic face fixing. Very low driving torque and less splitting; four cutting ribs under the head countersink the screw and leave a smooth, crack-free surface.

Sizes and prices3

Size	In pack	Item no.	Price
4,2×30	250 pcs	644530	16,20 € 0,065 €/pc incl. VAT 20,09 €
4,2×42	250 pcs	644542	19,10 € 0,076 €/pc incl. VAT 23,68 €
4,2×55	250 pcs	644555	22,04 € 0,088 €/pc incl. VAT 27,33 €
4,2×55	1000 pcs	644255	85,55 € 0,086 €/pc incl. VAT 106,08 €

Decking screw ESSDECK MAX

Price from0,131 €/pcincl. VAT 0,162 €/pc

Thicker than Classic and hardened the same way as construction screws — it holds up where demands are higher, for example a large or multi-level deck. For teak-like materials (cumaru, kirai) and Siberian larch, always use a stainless screw and pre-drill.

Sizes and prices2

Size	In pack	Item no.	Price
4,8×42	250 pcs	603542	32,72 € 0,131 €/pc incl. VAT 40,57 €
4,8×55	250 pcs	603555	40,19 € 0,161 €/pc incl. VAT 49,84 €
4,8×55	1000 pcs	10002171	132,58 € 0,133 €/pc incl. VAT 164,40 €

Decking screw HDS PRO — hidden fastening

Price from0,178 €/pcincl. VAT 0,221 €/pc

Hidden fastening: the screw goes in diagonally from the side of the decking board, so no screw head shows on top and the surface stays free of splinters. The drill point makes installation smoother. The system consists of a jig, screws and bits — the jig is required.

Sizes and prices2

Size	In pack	Item no.	Price
4,8×50	250 pcs	701550	44,62 € 0,178 €/pc incl. VAT 55,33 €
4,8×60	250 pcs	701560	47,84 € 0,191 €/pc incl. VAT 59,32 €

HDS PRO installation jig

Price71,06 €incl. VAT 88,11 €

Part of the HDS PRO system: it holds the screw at the right angle against the side of the board. Working with the jig is easy and the result is a deck with no visible screw heads.

Sizes and prices1

Size	In pack	Item no.	Price
—	1 pc	701517	71,06 € 71,060 €/pc incl. VAT 88,11 €